描述:NUMATICS電磁閥線圈結構,P01515EM4000040JPIS8551B313JPIS8551B321JPIS8553B305JPIS8553B317JPIS8553B313JPIS8553B321
NUMATICS電磁閥線圈結構,P01515EM4000040
NN系列型材氣缸
安裝尺寸符合VDMA24562及ISO6431標準氣缸從32mm到100mm
單、雙作用及單,雙活塞桿
活塞桿:高強度鋼、鉻表面涂鉻,拋光
鋁合金缸筒,放磨損涂層
磁環及感應開關選項 標準帶可調緩沖
溫度范圍:-10攝氏度~+60攝氏度
工作壓力:1到10bar
丁晴橡膠(NBR)及力膠(PU)密封
已過濾潔凈壓縮空氣,潤滑或不潤滑 鍍鋅螺母
NUMATICS電磁閥線圈結構,P01515EM4000040
These solenoid valves are intended for use on clean
dry air or inert gas, filtered to 40 micrometres or better.
The dew point of the media should be at least 10°C
(18° F) below the minimum temperature to which any
portion of the clean air/inert gas system could be
exposed to prevent freezing. If lubricated air is used,
the lubricants must be compatible with Nitrile elastomers.
Diester oils may cause operational problems.
Instrument air in compliance with ANSI/ISA Standard
7.0.01-1996 exceeds the above requirements and is,
therefore, an acceptable media for these valves.
JPIS8551B306
JPIS8551B318
JPIS8551B367
JPIS8551B368
JPIS8551B308
JPIS8551B320
JPIS8551B314
JPIS8551B322
JPIS8553B306
JPIS8553B318
JPIS8553B314
JPIS8553B322
JPIS8551B305
JPIS8551B317
JPIS8551B307
JPIS8551B319
JPIS8551B313
JPIS8551B321
JPIS8553B305
JPIS8553B317
JPIS8553B313
JPIS8553B321